Jump to content
CBR1100XX.org Forum

Crew Dawg Dave

Members
  • Posts

    94
  • Joined

  • Last visited

Everything posted by Crew Dawg Dave

  1. The bolts look good and I took the brake apart this morning and the pins show some minor wear on the front pin and no wear on they aft pin. Pads and rotor looks fine, no abnormal wear on either.... I recently changed my front tire and I going to have the front rotor rechecked to see if one was tweaked in the process…
  2. Rotor is NOT warped, the caliper is moving about 2mm in the mentioned directions Where and when?? I'm in Surprise
  3. I'm getting a vibration when I hard on the front brakes or when I'm braking from high speed 130+... Right front caliper bolts tight, but the caliper has movment (Up, down & side to side) Question I have is, 1. has anyone else experance this?? 2. Is anyone else right front caliper have any movement?? or is it solidly mounted?? Any help would be great... FYI I have a 97 Bird with 46,500 miles, Race Tech forks...
  4. Thanks for the info guys Ya just saved my ride this weekend!!!! Now, time to order new set of sprockets......
  5. Nice looking bike Steve.... Great shield!! Where did you order your Aeroblade from?? It's time to replace the purple shield on the XX
  6. I have a 97 XX and it has 45,000 miles on it. I just picked it up and I was changing the Chain found the front sprocket loose, as in it moves right to left, rocking, as if it is floating on the output shaft, the nut and washer was there and tight on the output shaft. It is an OEM sprocket and quite possible the original one from the factory. There did not appear to be any undo wear on the output shaft. Has any one run across this before??? This is not normal is it??? All the other bikes I have messed with, the front sprocket did not "float"....
  7. If anyone wants to sell their euro switch I'm looking for one.....
  8. Here is what I'm running on my V-Strom Led light bulb I really like this bulb. It has LED's laying on the side to bounce off the refectors and "fill" the light lens better than a regular LED bulb. You my have to demel/file a very small amout off the housing as the LED bulbs are a tiny bit bigger. I would show you pictures, but that will have to wait as I'm in Cali pick up my new 97 Bird from Obby in San Fran....... My bike
×
×
  • Create New...

Important Information

Terms of Use