Jump to content
CBR1100XX.org Forum

TOXXIC

Members
  • Posts

    23,952
  • Joined

  • Last visited

  • Days Won

    50

Posts posted by TOXXIC

  1. I should drop a line to Spencer Cycle and get them to do some looking at that. I bet a lot of guys would be interested in a dry shot if it were <$500 and an easy install

    That is SO true. Count me good for one, if under 5 bills and an easy install!

  2. I too, have heard Mototek put better bulbs in their new undertails.....let me know how bright they are. If you are interested I have the info on the hyperbright ones I installed.

  3. The only real way to figure out if you have enough stock fender to mount to is place the Mototek against it when it arrives. My guess is you will have to still cut more off of your stock fender! I trimmed mine over and over again until it was nearly gone, then the Mototek fit.

    If you need any help, Randy has some pictures, and I'm more than willing to take pictures of mine with the painted tail section removed, (I have to fix a brake light anyway.)

  4. My guess is he didn't write you because you raised a doubt in his mind as to what the speed limit was on that particular stretch of road.

    Sadly enough cops don't know the speed limits posted on most roads. They don't usually obey them while on-duty, (responding to calls), or while off-duty, as they "think" they are above the law.

    Sounds to me like your polite, respectful, and convincing argument paid off. Good job.

    I know what was going through the officer's brain because I've made the same mistake he did, ONCE!! You can bet he won't make the same mistake again. If two on board, quite likely a training, FTO car.

  5. Funny,

    I was going to ask about the sprocket sizes being run! The other night I was "indicating" 180, with a dropped front sprocket or a really 155.............

    However, I must say I like the R1 rear tail, sets the bike apart from the crowd. But, based on your prior comments, you may have accidently set yourself apart from the crowd.

    Ease back on the verbal throttle and try to get to know us, you might just make a friend or two..........

×
×
  • Create New...

Important Information

Terms of Use