BanditSid

Code 25 possible fix

Code 25 possible fix

I wish to start out by thanking all contributors to this forum for the knowledge I have gleaned in a short amount of time. Ok, getting to grips with new 2000 blackbird. This first time I rode for at least 30 miles the FI light came on. It was a code 25. Bike ran normally, but on subsequent rides FI light would come on sooner, after 10 miles, then 5. Bike continued to operate with no other hiccups other than the FI light. (Code 25 is for knock sensor.)   According to all
I agree with Fizzy, I have carried out the loom fix and took it a step further by adding a large diameter earth cable from the loom fix green wires to the frame earth. After that  I got an Fi light fault and I checked the ECU plugs and found one of the earth connections was corroded, it looks like the water entering the loom fix connector had wicked up the cable. I found that moving the wire in the ECU plug made the Fi light go off and on. It seems the loom fix issue goes beyond the connector on