R/R and Loom Fix questions....
I was going to do the loom fix on my XX, and I'm more than happy to just inspect, clean, and bundle up, but I started with checking my R/R.
Here's what I found. While the R/R did not fail on me, it's toast.
The wires to the harness side seem fine. The plug for the yellow stator wires was damaged (or certainly so by the time I got the wires out of it), but the wires themselves seem in fine condition.
Anyone know where I can get a replacement stator plug for the harness side?
The cap to the connector with the wires in it determines how your wires are grouped together. If you will look in the base of the cap at the spade connectors, you will notice that some are tied together, then there is a break in the electrical connection. That is how you decide how your wires are grouped together. I replaced mine and it had 18 wires in it also, but I guess I threw it away or I would take a better picture for you.
