BIG BOY Posted April 11, 2003 Posted April 11, 2003 Does anyone have pics of where they mounted their PCII???????????? Quote
XXFirefighter Posted April 12, 2003 Posted April 12, 2003 I'll post pics tomorrow, it's EASY Remove toolbag( you don't need it , it's a Honda) place it in there ! Dremel out a notch for the computer hook up Quote
XX Posted April 14, 2003 Posted April 14, 2003 i'm not positive but i think the mounting point for the pc3 is the same as the pc2? if so, you can relate to these pics if you'd like... :cool: Quote
KCBIRD Posted April 14, 2003 Posted April 14, 2003 I stuck mine on top of the stock ecu with velcro. It's clear back under the tail section and is out of the way. Quote
XX Posted April 14, 2003 Posted April 14, 2003 yup, that's mine in the pic, velcroed on top of the stock ecu :grin: Quote
vetteman Posted April 14, 2003 Posted April 14, 2003 mine too. the velcro even comes with the pc2. Quote
XX Posted April 14, 2003 Posted April 14, 2003 damn, the velcro came with it? my dealer charged me for that velcro! <jk> Quote
BIG BOY Posted April 15, 2003 Author Posted April 15, 2003 DAVE, I DON'T SEE NO DAMN PICS POSTED HERE!!!!!!!!! YOU DIDN'T CALL ON SATURDAY EITHER BITCH!!!!!!! DID 186 MILES ON SUNDAY. Quote
XX Posted April 15, 2003 Posted April 15, 2003 i think ya'll been playing your 'Disturbed' cd a little too loud lately.... :shock: :grin: ... all in good fun Quote
BIG BOY Posted April 16, 2003 Author Posted April 16, 2003 "Disturbed" is probably the ultimate riding music!!!!!!!!! Cranked up all the time!!!!!! Quote
Speed99 Posted April 17, 2003 Posted April 17, 2003 Is that High Performance Packing....errrr....Mounting tape? Shit what did the $et you back??? :grin: Quote
XX Posted April 17, 2003 Posted April 17, 2003 YA'LL ARE A CRACK UP! question is, if i mount it on the other side, won't i get more torque? :shock: Quote
Mithrandir Posted April 17, 2003 Posted April 17, 2003 question is, if i mount it on the other side, won't i get more torque? In the US maximum torque is gained by placing it on the right side. If you went to a more enlightened country that drives on the other side of the road, then the left side would give you more torque. In either case, max torque is always achieved while sitting still at traffic lights and reduces proportionally to the distance and speed from said traffic light. Quote
vetteman Posted April 17, 2003 Posted April 17, 2003 did that mounting system come in the box. or was that holding the box together. Quote
XX RATED Posted April 20, 2003 Posted April 20, 2003 Just a suggestion - As with most electronic equip. - it is ment to be kept as cool as possible. That being said, I would not stack the ECU & PC on top of each other. If you notice, Honda has put rear ducts (which are functional) in the tail section, I can only guess that the functionality is to make sure the ECU stays cool as possible; though I don't know if it runs warm or not - I never put my hand on it during / after a ride. The easiest place to locate the PC is where the tool pouch was, I just put the tool pouch off to the left - and cut a notch in the plastic the allow for the serial port to protrude from the side. The rubber straps work fine to hold everything in place. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.