poida Posted October 30 Posted October 30 Im looking to buy a dedicated motorcycle gps to use on my blackbird here in australia and on a 2000mdl vfr800 that i have in europe. the only motorcycle specific gps available now (that i could find ) is the garmin zumo xt3. they seem to cater mainly to non clip on handlebar set ups now. research on the ball mounts that fit through the steering head on blackbirds at least is that they dont fit well but no idea with regards to the vfr. Does anyone here have experience or knowledge on fitting one to these older bikes. Quote
Zero Knievel Posted October 30 Posted October 30 I have to ask, what mount comes with the GPS you are interested in? I used RAM mounts with great success. So long as there is a compatible adapter plate, you should have options. You can also search for older IPX7 GPS units. The Zumo 660 still does the job, and I still have mine. I used a RAM ball on the handgrips but later added one to the center (where the hex hole is) for the GPS. Quote
poida Posted October 30 Author Posted October 30 (edited) this is what ive found online .not sure if that would fit between the clip on handlebar and clutch master cylinder.im going to assume the clamp can be spun around so the thicker section with nuts can be away from the clutch master cylinder it's a garmin zumo 3 6inch screen If you're talking about this part... http://www.expressmounts.com/item-ram-moun...all/ramb342.htm ...itjust doesn't work on the CBR1100XX. Or, at least that has been my experien part number for the link you posted shows nothing available Edited October 30 by poida Quote
rockmeupto125 Posted October 30 Posted October 30 I have a similar pedestal mount that I acquired used, because I know I never straight out bought something like that. It is inset and has longer allen head bolts, has the arrow delineating "up", and works just fine on my brake master cylinder. 1 Quote
Zero Knievel Posted October 30 Posted October 30 Here's what I had. You can see the left clip on RAM mount and the one I used in the center. I'd think they would still be available. One option is https://rammount.com/products/ram-b-309-1u Here's another...https://rammount.com/products/ram-b-309-6u 1 Quote
SwampNut Posted October 30 Posted October 30 This works great and comes off easily if desired. I take one with me when I get rental bikes. It was part of the phone mount, however they are available on their own and as part of camera mounting kits and other things. The most common thing to search for is "17mm ball mount." Quote
poida Posted October 30 Author Posted October 30 does that one clamp to the metal hose fitting? Quote
poida Posted October 31 Author Posted October 31 cheers for the info.i didnt realise there was such a big range of ball mounts available. Quote
SwampNut Posted October 31 Posted October 31 I have a lot of balls. But yeah, it's infinite. Since I insist on good phone and other device mounts in/on everything, I've got a bag of them. 1 Quote
Zero Knievel Posted November 1 Posted November 1 17 hours ago, SwampNut said: I have a lot of balls. But yeah, it's infinite. Since I insist on good phone and other device mounts in/on everything, I've got a bag sack of them. FIFY 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.