Photos, descriptions and asking prices now posted here:
http://www.thetandemlink.com/CBRXX/forsale_XX.html

• OEM clip-ons in good shape
  
  
• Corbin Gunfighter & Lady saddle SOLD
• Left-hand lower OEM cowl SOLD
• Right-hand lower OEM cowl SOLD
• OEM clear windscreen SOLD
• Throttlemeister SOLD
• Alternator cover SOLD
• Rear view mirror covers SOLD
• Aerostich Unobtanium heated vest SOLD
• Tucker-Rocky cordura soft luggage SOLD
• 2 OEM oil filters (factory sealed) + Miscellaneous new spares SOLD
• '00 Geza Gear Sport Classic cover SOLD
• Haynes CBR1100XX Service Manual SOLD
• Battery Tender Plus SOLD
• Aerostich Warm Wrap Grips SOLD
• Original tool kit + owners manual SOLD
• Tire Plugger SOLD
• OEM license plate bracket & light SOLD
• Show Chrome Digital 5 Function SOLD

She was a great ride...

not sure if this is the right thread..


if they are available
I would take the following two items:

a.tire plugger.
b.volt meter.

I'll go with the alternator cover and mirror covers- email sent...

How much for the tool kit, tool kit rubber strap and owners manual?

The bike cover should be compatible with a Givi Wingrack (sans luggage), right?

Not really...

The fabrics are very stretch-able, but there are limits since the Geza covers are custom tailored to each bike and any accessories that alter the OML, e.g., taller windscreens, luggage racks, cases, etc.

Moreover, having lived with this cover for a while and understanding how they are designed I would expect that a cover stretched beyond it's design pattern would cause the cover to lose a lot of the UV and water resistance properties at those points where the fabric was pulled tighter than intended and that the fabric would fail prematurely around the edges of something like a Give Wingrack in that scenario.

At least it looks like you have another potential buyer. No big loss...I was looking for something better than the two old bath towels I've been using to keep dust off the 'Bird.

PM sent about OEM license plate bracket & light

Just two more pieces to go....

OEM clip-ons in good shape
OEM clear windscreen in nearly new condition

Photos, descriptions and asking prices now posted here:
http://www.thetandemlink.com/CBRXX/forsale_XX.html

PM sent on the windscreen

Don

Just one more item to go....

OEM clip-ons in good shape



Original OEM clip-ons, less end weights. Used for about 2,000 miles before replaced by Heli-bars which, unfortunately, went with the XX to the salvage yard. The 'shellack' is buggered up from removal of the grips and other hardware, but they are otherwise fully functional and all of the exposed aluminum and hardware is in wonderful shape.

Scale rating: 10/10 Function & 9/10 Cosmetic

Price today from Ron Ayers $110.04 ea ($220.08)

Asking $60 including shipping for the pair.