Anyone got Pazzo levers on their Bird? I saw some recently on a VTEC VFR and they looked very bling. I just got this reply from them when I asked if they had some to suit a 2004 Bird.

I think the clutch will fit but the brake does not.
The 2003 CBR1100XX brake lever is different than ours, not sure of the 2004.
Our brake levers will fit the 02-05 VFR800 but not the previous years.
Our clutch lever will fit the 98-05 VFR's
Not sure about the CBR1100XX
Here is a list of our Honda levers, if your bike shares levers with any of
these we can put a combonation together for you.
HONDA Our(Brake Part # /Clutch Part #)

CB 599/CB600 Hornet (98-04) F-18/H-626

CBR 600 F2,F3,F4,F4i (91-05) F-18/H-626

CB 919 (02-05) F-18/H-626

CBR 900RR (93-99) F-18/H-626

CBR 929RR (00-01) F-29/H-626

CBR 600RR (03-05) F-29/Y-688H

CBR 954RR (02-03) F-29/Y-688H

RC 51 (00-05) F-29/H-33

CBR1000RR (04-05) F-33/H-33

VTR1000F (98-05) F-18/H-33
(Firestorm/Superhawk)

VFR800 (02-05) F-18/H-33



Regards
Markus
sales@pazzoracing.com
www.pazzoracing.com

I'm not sure whether any of the above levers is the same as the Bird. Anyone over the pond got any idea?

They look exactly like CRG knockoffs, same adjuster and style. I checked a few years back when I ordered them for my RC and they didn't have any to fit the XX.

ST1100 levers are the same...altho I find it difficult to think you'd find blingtastic racing levers for an ST1100.

Don't hold me to this, but I understand that the levers from the following bikes are interchangeable with the XX:

Brake:
CBR600F4i
CBR954RR

Clutch:
CBR1000RR
CBR929RR

OzCrow,

We will have something available for the Blackbird in January. Warchild will make an anouncement when they are ready. He will be getting on one the first sets of the new Pazzo levers.

Mike
CTSmoto
www.ctsmoto.com

Goddammit, there goes more money... :roll:














Do they make them in blue? 8)

Pretty much what I thought when I read they were going to be available. Hopefully Dale will negociate another group buy, but I have a feeling I'm in regardless. Anything in black and red will seal the deal.

Yes they come in Blue,Red,Gold,Silver or black

I will post some pics later.

Mike
CTSmoto

:iloveyou:

Cool! Your right up the road from me a little ways.

And next door to me :lol: :lol:

I'll take a blue set please :D

Alrighty, gents, here we go.... :twisted:

Here is the Pazzo brake lever for my R1, before installation... sweeeeet, no?





Here is my R1's clutch lever installed:





Here some anodized work that Redbird and Shon might be interested in: :twisted:





How about some black Shorty's?





Or black Shorty's with Gold fittings?





Or gold Shorty's with black fittings?





Blue with black fittings on a blue R1:





Now, as far as our Blackbird's go.....

It is true that Pazzo Racing doesn't make a XX-specific set of levers. The other CBR models won't fit. HOWEVER, the clutch-side VFR800 will fit.... not so the brake lever.

So.... the "receiver" has to be custom fabricated, and that is what CTS-Moto is doing now. I hope to have the first prototype in hand here in a couple weeks.

By the way, guys... CTS-Moto has proven to be a stellar, top-notch organization. They apparently do a lot of custom work in-house, and they have some god-like stuff.

Check out this billet-aluminum sprocket-cover for the R1 that I haven't had a chance to install yet. It is EXQUISITE!!





It may not be apparent from the photo, but the Tuning Fork logo is actually cut out (and thus held in place by the three arrow-heads). This large amount of "cut out" material will reveal the front sprocket behind it once installed. The outer circle part of the Tuning Fork logo is actually etched in the aluminum.... *very* nice!!

Looks exactly like the CRG's I have, on both RC's.

The fit and feel of these type of levers, offer a much better and more comfortable feel than stockers. If you do alot of clutch work or alot of braking your hands/fingers dont get nearly as fatigued as they do using stock levers.

GOOD JOB GUYS! 8)

That's just what I wanted to hear. :D

This gets my dick hard.

Imagine that on a black and yellow bird. Rar. I'm horny.

Any idea of the price point Dale?

OH Fuuuuu....

I've always thought the stocks were too long...

I'm in love with those Black shorty's...

I'm working on getting the prices now.... probably have them shortly.....

Here's a couple of photos of the finished brake-side receiver block before they were sent off to be anodized:







Can't wait for these babies to be finished.... these Pazzo levers are some tasty eye-candy, for sure...

:thumbsup:

So sweeeet! 8)

+1 8)


I hate you Dale......... :iloveyou: :wink:

Black shorties with red ajusters?

Mmmmmmmm :D