ElChingonCabron Posted November 7, 2003 Posted November 7, 2003 Okay, so I'm trying to install a throttlemeister and need to remove the bar ends. Right side was cake but the left is like WTF?!?! I pushed on the metal tab per the service manual and the damn metal ring clip came out but not the rest of the internals! So how the hell do I get that sucker out of there?!? Already feeling like a dumbass....who here has the obvious answer for me to feel even more like an idiot? :fingers: Thanks! Sanch Quote
Mikey Posted November 7, 2003 Posted November 7, 2003 I used a lubricant like wd40 etc. Then pulled with needlenose pliers. I just cleaned it off before re-insertion. Quote
jcrich Posted November 7, 2003 Posted November 7, 2003 What I did when I put my Barender locks on was to take two small flat head screw drivers and slowly work it out a little at a time. The internals have two rubber grommets that hold it in., as you prolly saw on the other one. When its out far enough, pliers time Quote
Alanb Posted November 8, 2003 Posted November 8, 2003 You call me up, say you are ready for your screen that's been in my car for 3 weeks, want to clean my "dirty hole" as you like to call it, and I'll take a look at the bike. Alan Quote
Rainchaser Posted November 8, 2003 Posted November 8, 2003 I used a lubricant like wd40 etc. Then pulled with needlenose pliers. I just cleaned it off before re-insertion. That's so ripe for misinterpretation.. Quote
Mikey Posted November 9, 2003 Posted November 9, 2003 I've long since stopped worring about how people on this board can take things..hehe I used a lubricant like wd40 etc. Then pulled with needlenose pliers. I just cleaned it off before re-insertion. That's so ripe for misinterpretation.. Quote
DaveK Posted November 10, 2003 Posted November 10, 2003 We already know Mikey is VERY GAY ! Those same needle nose pliers were used to tweak my testies just last month. :shock: Quote
TOXXIC Posted November 10, 2003 Posted November 10, 2003 Hey Alan, if Sanch doesn't want the higher factory screen I'll take it!! Quote
ElChingonCabron Posted November 11, 2003 Author Posted November 11, 2003 Hey Alan, if Sanch doesn't want the higher factory screen I'll take it!! HAH....I still want it, just need to hook up with him...he's too busy diving rather than riding that we haven't hooked up yet! Thanks to all for the sound advice....got the bastard out and TM installed...kick ass!!! Put on some new grips also :cool: Quote
Mikey Posted November 11, 2003 Posted November 11, 2003 VERY gay? You mean there are levels? And I though you were more of a vise grip guy, so you can just lock em and leave em... We already know Mikey is VERY GAY !Those same needle nose pliers were used to tweak my testies just last month. :shock: Quote
Northman Posted November 11, 2003 Posted November 11, 2003 I was wondering why Dave was in The Garage............ :roll: Quote
Suf Daddy Posted November 27, 2003 Posted November 27, 2003 SOunds like someone woke up with a bottle of either rolling around the floor. OMGayGod RUN RUN RUN RUN RUN! :poke: -Suf Daddy Quote
ConqSoft Posted November 27, 2003 Posted November 27, 2003 My Throttlemeister came with a "tool" to remove the internal bar weight on the throttle side. Popping it out with that was a piece of cake. Quote
Rainchaser Posted November 27, 2003 Posted November 27, 2003 My Throttlemeister came with a "tool" to remove the internal bar weight on the throttle side. Popping it out with that was a piece of cake. Having just put my Throttlemeister on today, mine came with the same metal 'tool' or shaft to help pull the weight out of the throttle side. The other (left) side you just unscrew the end, put the new end on. (ie: Dont try to pull the stuff out from the bar) I absolutely love it. I did have to cut off the end of the grip though as they were just a tad too long. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.