Jump to content
CBR1100XX.org Forum

bturd

Members
  • Posts

    33
  • Joined

  • Last visited

Reputation

0 Neutral

About bturd

  • Birthday 09/18/1976

Contact Methods

  • Website URL
    http://
  • ICQ
    0

Profile Information

  • Location
    qld aust
  • Interests
    bikes
  1. yeah on the inside, iirc i had to use a fair bit of force to get it in position
  2. the canister slipped over the collector on mine, maybe they sent u the wrong canister?
  3. yes and yes, iit's a cunt of a job , it's like one of the collector pipes is too long
  4. bturd

    18t Sprocket.

    hows your fuel economy with the 18t? better than the 17t? better than the 16t :roll:
  5. try here mate http://www.ozblackbird.net/viewtopic.php?t...=asc&highlight= cheapest and best mods for suspension r jacking your ass end up with a shim(the bike drops into the corner quicker) and setting your riders sag, imo
  6. well if the front still looks new, no point replacing it
  7. try a 16 t front sprocket, front wheel will be up for sure :twisted:
  8. my full micron come with a different radiator bracket for the efi model, not that i needed it, wonder if it might fix the prob? i can send it down if ya want crow?
  9. i got 16t front sprocket and it puts the speedo out by 8.5%, thats on a 97 bird, from what i can make out the birds with the digital speedo are out even more
  10. bturd

    micron cans

    i bought a full zeta system and as far as i can tell the can is part of a slipon kit, the exhaust strap they sent is too big, and the numbers on the can comply with a slipon kit, im a bit worried the can is smaller than it should be, and decreasing flow, there is no baffle in the end of the can. if the can is the same as the slipons then im not really worried but i dont think it is :cry:
  11. bturd

    micron cans

    anyone know if theres any difference between the slipon cans and the full system can for bird thanks
  12. bturd

    Canyon Dancer

    what tha fuck is a canyon dancer :?:
  13. bturd

    290?

    its alot more fun with the 16t, the speedo needle just flies around to 200ks, and the front end just wants to lift in first and second
  14. bturd

    290?

    went for a blat this morning to the beach, got on good straight and hit 290kph, still had more to go, before i changed my chain and sprocket could only get 280 with a tailwind. i changed stock sprockets to 16/44, is my bike faster or is front sprock fuckin with my speedo? my bike is faster would be a good answer
×
×
  • Create New...

Important Information

Terms of Use