rockmeupto125 Posted January 19, 2021 Share Posted January 19, 2021 The last time I threw stuff out and admitted it, I was chastised for not posting up first. So here we are. I just broke down an injected XX engine for a forum member who needed a set of cases, so I have all the eviscerant available if anyone is looking for XX guts. And of course, you all know to contact me for all matter of leftover XX parts, they come and go pretty regularly here. 😁 Quote Link to comment Share on other sites More sharing options...
SwampNut Posted January 19, 2021 Share Posted January 19, 2021 I would love to have a piston and rod as a wall decoration. Happy to pay shipping on that, but if anyone else NEEDS them, I'm lower priority. Quote Link to comment Share on other sites More sharing options...
rockmeupto125 Posted January 19, 2021 Author Share Posted January 19, 2021 No problem! Quote Link to comment Share on other sites More sharing options...
XXitanium Posted January 19, 2021 Share Posted January 19, 2021 Is the FI stuff there... also not a high priority for me if someone else needs it. Quote Link to comment Share on other sites More sharing options...
Furbird Posted January 20, 2021 Share Posted January 20, 2021 I'll bite. How much for a set of injectors? Quote Link to comment Share on other sites More sharing options...
rockmeupto125 Posted January 20, 2021 Author Share Posted January 20, 2021 On 1/19/2021 at 3:50 PM, XXitanium said: Is the FI stuff there... also not a high priority for me if someone else needs it. What do you need, Bill? Quote Link to comment Share on other sites More sharing options...
rockmeupto125 Posted January 20, 2021 Author Share Posted January 20, 2021 22 hours ago, Furbird said: I'll bite. How much for a set of injectors? I'm sure I have 4 that work. $75 shipped. Quote Link to comment Share on other sites More sharing options...
XXitanium Posted January 20, 2021 Share Posted January 20, 2021 31 minutes ago, rockmeupto125 said: What do you need, Bill? ...mind you, I think there would be some major machining, but I have a kit bike in the garage (more of a hope chest than basket case?) For a 913CC build on a CB750F jug. I'm getting closer to retirement. Every once-in-a-while I pick up another bit. ...could it be done? I'd need the pieces from the injectors back to wherever they're controlled (and that too?) Quote Link to comment Share on other sites More sharing options...
superhawk996 Posted January 21, 2021 Share Posted January 21, 2021 2 hours ago, XXitanium said: I'd need the pieces from the injectors back to wherever they're controlled (and that too?) The throttle body spacing is likely different as well as diameter so you'd probably have to go full custom. You might be able to use the carb set as throttle bodies, then add the TPS to it. The points system would have to be replaced with a CPS and trigger. Add a high pressure fuel pump somewhere. Rig an injector rail and FPR and find a way to mount the injectors. Add the wiring and ECU. Probably a higher output charging system. Probably a few more bits not coming to mind. Then a custom tune. Maybe it's easier than I'm thinking it'll be, but I think it'll be quite the project. Quote Link to comment Share on other sites More sharing options...
rockmeupto125 Posted January 21, 2021 Author Share Posted January 21, 2021 Holy cow. And I gave up the idea of putting ABS on an XX. Dude, there are not enough years in your life to accomplish this. Swap engines or give it up. 1 Quote Link to comment Share on other sites More sharing options...
superhawk996 Posted January 21, 2021 Share Posted January 21, 2021 It would probably be easier to swap in a XX motor and harness than to convert the current motor. It would totally change the look of the bike which would be a plus or minus depending on your desires. Guessing most people that are slightly in the know would think it's one of the modern retro bikes. It would be a better vehicle, but loose it's soul. Quote Link to comment Share on other sites More sharing options...
TOXXIC Posted January 21, 2021 Share Posted January 21, 2021 3 hours ago, superhawk996 said: It would probably be easier to swap in a XX motor and harness than to convert the current motor. It would totally change the look of the bike which would be a plus or minus depending on your desires. Guessing most people that are slightly in the know would think it's one of the modern retro bikes. It would be a better vehicle, but loose it's soul. Lose....it's soul. 😂 1 Quote Link to comment Share on other sites More sharing options...
TOXXIC Posted January 21, 2021 Share Posted January 21, 2021 Just now, TOXXIC said: Lose....it's soul. 😂 Lose its soul. 1 Quote Link to comment Share on other sites More sharing options...
SwampNut Posted January 21, 2021 Share Posted January 21, 2021 Pedantic asshole! I knew I liked you for a reason. 1 Quote Link to comment Share on other sites More sharing options...
John01XX Posted January 21, 2021 Share Posted January 21, 2021 I have been messing with a throttle position sensor code for the last few years intermitantly. Tech keep telling me I need to replace the throttle position sensor but Honda claims that it is not sold by itself. Must buy the whole throttle assembly so still not willing to spend the bucks. Not even sure what I need even if the actual throttle position sensor is in fact bad. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.