XXBirdSlapper Posted December 29, 2019 Share Posted December 29, 2019 On 12/21/2019 at 3:33 PM, blackhawkxx said: Doesn't it go in the same way that it came out? Uve nevr worked on modern motetcikle enjin before. Go away. Quote Link to comment Share on other sites More sharing options...
RXX Posted December 30, 2019 Share Posted December 30, 2019 1 hour ago, XXBirdSlapper said: Uve nevr worked on modern motetcikle enjin before. Go away. You are a dick, you know that, right? Quote Link to comment Share on other sites More sharing options...
superhawk996 Posted December 30, 2019 Share Posted December 30, 2019 Tomek hasn't answered which is interesting. I wonder if he's trying to figure out why he didn't think of that or just trying to figure out a good response. Quote Link to comment Share on other sites More sharing options...
XXBirdSlapper Posted December 30, 2019 Share Posted December 30, 2019 5 hours ago, RXX said: You are a dick, you know that, right? That's not what Tomek's mom says honcho. Quote Link to comment Share on other sites More sharing options...
tomek Posted December 30, 2019 Author Share Posted December 30, 2019 (edited) 16 hours ago, superhawk996 said: Tomek hasn't answered which is interesting. I wonder if he's trying to figure out why he didn't think of that or just trying to figure out a good response. Actually I did. I modified my post. I was under impression anyone with iq above room temperature would get it. I was obviously wrong. Dlaczego ty kubanska kurwo musisz byc takim pierdolonym chujem na kazdym kroku ? Wpierdalasz sie cienki palancie tam gdzie ciebie kurwa nikt nie zaprasza. Spierdalaj. Edited December 30, 2019 by tomek Quote Link to comment Share on other sites More sharing options...
XXitanium Posted December 31, 2019 Share Posted December 31, 2019 (edited) Oh shit, gotta break out Google Translate... ...noice. Edited December 31, 2019 by XXitanium ...because... Quote Link to comment Share on other sites More sharing options...
XXitanium Posted December 31, 2019 Share Posted December 31, 2019 On 12/29/2019 at 7:21 PM, RXX said: You are a dick, you know that, right? ....you want to get his attention, call him communist, socialist - snowflake.... Quote Link to comment Share on other sites More sharing options...
tomek Posted December 31, 2019 Author Share Posted December 31, 2019 2 hours ago, XXitanium said: Oh shit, gotta break out Google Translate... ...noice. Basically I said " Merry Christmas and Happy New". 😁 Quote Link to comment Share on other sites More sharing options...
XXBirdSlapper Posted January 3, 2020 Share Posted January 3, 2020 On 12/29/2019 at 7:21 PM, RXX said: You are a dick, you know that, right? Spierdalaj Quote Link to comment Share on other sites More sharing options...
XXBirdSlapper Posted January 3, 2020 Share Posted January 3, 2020 On 12/31/2019 at 2:34 PM, XXitanium said: ....you want to get his attention, call him communist, socialist - snowflake.... pieprzyć się z serową głową Quote Link to comment Share on other sites More sharing options...
cecome Posted January 3, 2020 Share Posted January 3, 2020 (edited) On 12/30/2019 at 11:48 AM, tomek said: Dlaczego ty kubanska kurwo musisz byc takim pierdolonym chujem na kazdym kroku ? Wpierdalasz sie cienki palancie tam gdzie ciebie kurwa nikt nie zaprasza. Spierdalaj. You sound angry. Are you angry right now? I'm sorry. Edited January 3, 2020 by cecome Quote Link to comment Share on other sites More sharing options...
tomek Posted January 11, 2020 Author Share Posted January 11, 2020 (edited) Bike is back together less parts of bodywork, but I'm going to throw some fading graphics. Took her literally around the block, everything is fine. I just got back from Des Plaines Honda, sure enough, the recall on driveshaft was not done. To my utter surprise they offered to come and pick up the bike from my place next Saturday. Nice. I'm going to convert existing red oem paint into the ugly HOK finish. Im pretty sure it will fade and starts to peel off in year or two. The existing red will serve as a base for House of Kolor custom kandy. First layer will be couple coats of mix of Ice Pearls, then 5-6 coats of apple and cherry kandy mix. Then clear coats, kolor sanding, yada, da. There will be fading graphic on side fairing, but I still have to figure out how tp get it done with the least effort. Probably I'll remove stickers after I spray sparkles, so fading graphics will area with no sparkle under the kandy. It won't be visible from the angle and weak light. This is what I have in my mind. lol. https://www.ebay.com/itm/Wings-Honda-Skull-Decal-Stickers-Set-Of-2-For-Car-Truck-Motorcycle-Racing-Bike/263501819009?epid=4015095771&hash=item3d59eeac81:g:TcoAAOSw9OFZISOb Edited January 11, 2020 by tomek Quote Link to comment Share on other sites More sharing options...
blackhawkxx Posted January 11, 2020 Share Posted January 11, 2020 Be sure to post up pics when done. Quote Link to comment Share on other sites More sharing options...
tomek Posted January 21, 2020 Author Share Posted January 21, 2020 Operational pause. Dealer picked up the bike on Saturday for driveshaft recall. They promised 11am - noon, and arrived 11:15 am. I'm still shocked. 1 Quote Link to comment Share on other sites More sharing options...
XXBirdSlapper Posted January 22, 2020 Share Posted January 22, 2020 Are we taking bets they actually fix it correctly? Quote Link to comment Share on other sites More sharing options...
superhawk996 Posted January 22, 2020 Share Posted January 22, 2020 3 hours ago, XXBirdSlapper said: Are we taking bets they actually fix it correctly? And use the right lubricants. Quote Link to comment Share on other sites More sharing options...
XXBirdSlapper Posted January 22, 2020 Share Posted January 22, 2020 8 minutes ago, superhawk996 said: And use the right lubricants. If they remember to use any. Quote Link to comment Share on other sites More sharing options...
tomek Posted February 23, 2020 Author Share Posted February 23, 2020 57 F deg today, took her for longer 20 miles spin. It is all good. Power hits definitely harder courtesy of corrected cam timing and cleaned ports. Somewhat louder since exhaust opens sooner. New driveshaft virtually eliminated drivetrain lash. I`ve changed my mind on repainting the bike. I just could not bring myself to painting over perfectly good OEM plastics. Instead I`m getting chinesium unpainted plastics from ebay. 120 bucks for everything. LOL. It is gonna be more work though, chinesium primer won`t do, gotta start with proper two part epoxy primer. 1 1 Quote Link to comment Share on other sites More sharing options...
XXBirdSlapper Posted February 24, 2020 Share Posted February 24, 2020 Have you checked for plastic particles in the oil yet?? Quote Link to comment Share on other sites More sharing options...
tomek Posted April 25, 2020 Author Share Posted April 25, 2020 Well, the project has not been abondoned. Finally have pulled my head of the ass and primed ebay plastics. I've used POS- according to one expert here- House of Kolor kp2cfa primer. Devillbiss finishline primer gun, 1.8 mm tip, 30 psi at the gun with trigger pulled. It is gonna be two color paint job, silver will be replaced with HOK platinum pearl, red - custom kandy mix of oriental blue and teal over silver base. There will be graphics under candy. 3M has very nice line of sand papers- cubitron. It is the shit, lasts very long and cuts extremely well. Time saver, I've used 320+ grid for primer. Quote Link to comment Share on other sites More sharing options...
John01XX Posted April 25, 2020 Share Posted April 25, 2020 Do you spray with the pieces on a flat surface as pictured or do you hang them? Nice that you have access to a decent paint booth. Quote Link to comment Share on other sites More sharing options...
tomek Posted April 25, 2020 Author Share Posted April 25, 2020 Those 4 large pieces (sides and tank covers) were laying as in pictures. Small ones, I grab them by mounting tab, etc. and just spray like that. It was just primer, so some dust and finger print on hidden area won't matter. It is gonna take more way careful arrangement to color and clear coat. I don't like to hang fairings because they won't stand still - the mixture of paint and air hits them pretty hard. When shooting pearls, candies and metallics proper 6 inches gun to the painted surface is absolutely critical. I usually run thick wire between tabs on the back side and use it as a grab handle. Spray booth is not quite free. I have to deal now with this.😁 Quote Link to comment Share on other sites More sharing options...
blackhawkxx Posted April 26, 2020 Share Posted April 26, 2020 Keep updating with the paint stories. A paint booth is a great help even if it cost you some work. I painted a truck in my garage one time, never again. BTW- a Cuban could straighten that rod. 😁 Quote Link to comment Share on other sites More sharing options...
SwampNut Posted April 26, 2020 Share Posted April 26, 2020 What do you prep your surface with before painting? Yak jizz, or some unprofessional bullshit like acetone. Quote Link to comment Share on other sites More sharing options...
tomek Posted April 26, 2020 Author Share Posted April 26, 2020 5 hours ago, SwampNut said: What do you prep your surface with before painting? Yak jizz, or some unprofessional bullshit like acetone. Let`s assume you are not trolling, 320 grid and then soap and water. I don`t like to use any chemicals for final wash for plastics. I feel I don`t have to mention that for metal surfaces I strongly recommend acetone. Try that aforementioned 3M sand paper, it is awesome. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.