XXitanium Posted October 16, 2017 Share Posted October 16, 2017 One of my leads had worn through. I cut off the clip end close to the strain relief. ...then i realised I hadn't kept track of which one went to which connection inside the box. Any ideas on hwo to temporary rehook/ test? Quote Link to comment Share on other sites More sharing options...
superhawk996 Posted October 16, 2017 Share Posted October 16, 2017 Turn it on and put a voltmeter to them. A digital meter will show - before the voltage if the leads are backwards and an analog's needle will try to go down instead of up. If you don't have a meter just touch/rub them to a charged car battery with the charger on, smaller spark = correct polarity. Most paired DC wires have a marker where the insulation on one has little stripes of rubber, I think that's the positive but don't remember. If you have any other devices around check their wires. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.