Jump to content
CBR1100XX.org Forum

Garage cleanout


Recommended Posts

Now that the house is under contract, I have to get rid of what is left of my 2000 Bird part out from 18 months ago or so.

Not much left and virtually no value so offering it up for shipping and paypal fee costs only. The Bird had 53,000 miles I believe.

Complete linked brake system 

Pair passenger rear sets

Engine and trans radiators

Resprayed black fuel tank with pump installed. Still has a little fuel with stabil to preserve the pump.

Throttle body

reg/rectifier

Rear grab rail (Black)

 

What is not wanted will be disposed of since I am not moving and storing it

 

Pictures available upon request

Edited by John01XX
Link to comment
Share on other sites

Good morning John, congrats on house, I would be looking for a black grab rail that is attached right behind the seat, it would be for my antique 1997 XX

 

Edited by Shoe
add info
Link to comment
Share on other sites

1 hour ago, Shoe said:

Good morning John, congrats on house, I would be looking for a black grab rail that is attached right behind the seat, it would be for my antique 1997 XX

 

Don't talk that way...our 97s are almost old enough to order a beer.

  • Upvote 2
Link to comment
Share on other sites

I will get everything sorted out in the next couple days with individual replies and shipping costs.

I am keeping three items for future sales that are hard to find now adays. (good headlight housing, ECU and straight subframe)

Edited by John01XX
Link to comment
Share on other sites

John,

A big favor.

Before you ship the r/R, would you post a picture of the two connectors?

 

I still haven't installed my New mosfet r/R. I purchased the BMW cable which looks like it will plug and play the stator side, but I'm not sure about the battery end.  I'm trying to leave my oem harness intact , for that on the road failure.

Thanks

Link to comment
Share on other sites

15 minutes ago, redxxrdr said:

John,

A big favor.

Before you ship the r/R, would you post a picture of the two connectors?

 

I still haven't installed my New mosfet r/R. I purchased the BMW cable which looks like it will plug and play the stator side, but I'm not sure about the battery end.  I'm trying to leave my oem harness intact , for that on the road failure.

Thanks

Is this what you are looking for Craig?

 

It has the short pigtail so I know it will not fit a 2001 or later but as Mike said, I am not sure if it will fit a 99 model but maybe?

 

IMG_0845.JPG.b652b2f1f23bb769bf979e788c710fc1.JPG

Link to comment
Share on other sites

Yes John,

And thank you.

They don't match what I have in replacement parts, but I think that I can create something that will work.

 

The picture makes me plan for extra time when I open it up.

Link to comment
Share on other sites

No I dont.

I plan to do this mosfet exchange on my 01 this week.

If I remember, 01 was the first year of the higher wattage regulator.

And it was repositioned.

I'm sure that it will work, just not sure about the connectors.

Link to comment
Share on other sites

The 01 has a long pigtail and is a pain to correctly route. I did mine about a year ago. It is relocated away from the engine obviously for less heat. But routing from the right side tail forward and then across right by the battery box was a bear to get done. Have fun

 

Link to comment
Share on other sites

4 hours ago, Furbird said:

Got my 50-ish pounds of stuff today.  Lots of mystery prizes too! 

Should have been 3 boxes totaling 67 lbs !

I was notified of delivery of the (2) 30lb boxes but not the 7lb box.

Did you get all three? The 7lb box had the two radiators inside.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

Terms of Use