Jump to content
CBR1100XX.org Forum

usb voltage bracket with momentary switch


Recommended Posts

  • 2 weeks later...
On ‎10‎/‎1‎/‎2016 at 9:16 PM, RXX said:

Yes, it is a slick setup. Looking forward to the install.

 

 

when you install can put some photos up and feedback? 

 

thanks

 

 

Edited by vw4tube
Link to comment
Share on other sites

2 hours ago, TOXXIC said:

Any ideas how this might work on an XX with VFR bars or Heli bars installed?

 

 

I did send some blanks to a guy that bent them to fit.  I will look to see about finding the photos. 

 

 

Link to comment
Share on other sites

This was installed on VFR bars on the fork pinch bolts 

image.jpg

image.jpg

 

 

i have a few blanks left I will see about making one to test. 

Edited by vw4tube
  • Upvote 2
Link to comment
Share on other sites

10 hours ago, TOXXIC said:

Any ideas how this might work on an XX with VFR bars or Heli bars installed?

 

I have VFR bars and the bracket will need some modifications to fit it. Won't fit right out of the box.

 

The pinch bolts are where I am looking also. 

Edited by RXX
Link to comment
Share on other sites

10 hours ago, RXX said:

I have VFR bars and the bracket will need some modifications to fit it. Won't fit right out of the box.

 

I'd have to look at my VFR bars, but would not making a longer section with more of a "slot" than a "hole" give flexibility in how to mount it (different handlebars)?

Link to comment
Share on other sites

2 hours ago, Aunt Zero said:

 

I'd have to look at my VFR bars, but would not making a longer section with more of a "slot" than a "hole" give flexibility in how to mount it (different handlebars)?

 

Yes. But it is usable as is. Just roll with it.

Link to comment
Share on other sites

On ‎10‎/‎16‎/‎2016 at 3:10 PM, TOXXIC said:

Very cool way to adapt to those with aftermarket bars!

 

Let me know if you want one.  I can send just the blank if you want. 

 

thanks

 

Link to comment
Share on other sites

  • 4 weeks later...
  • 1 month later...

Nice water jet work.

 

I'd suggest, instead of rocker switches, use a marine grade toggle with a boot.  I have used this combo on my atv.  Very nice to have a switch that will last if it gets wet and dirt is kept out of with the boot.

https://www.amazon.com/gp/aw/d/B000NHZZEG/ref=mp_s_a_1_4?ie=UTF8&qid=1483134969&sr=8-4&pi=AC_SX236_SY340_FMwebp_QL65&keywords=marine+grade+toggle+switch&dpPl=1&dpID=41hsKHh6%2BgL&ref=plSrch

 

Das boot

https://www.amazon.com/gp/aw/d/B004UOUKXY/ref=pd_aw_vtph_200_lp_2?ie=UTF8&psc=1&refRID=F2YKMZ8FNZMPVQ4Q4PHS

 

Edited by TuffguyF4i
  • Upvote 1
Link to comment
Share on other sites

thanks for the input.  I can make any configuration you want.  I am making one now for a guy in the UK that has heated grips, wants the control box to mount to it, and attach to the fork pinch blots.   

Link to comment
Share on other sites

  • 1 year later...
On 1/5/2017 at 8:11 AM, vw4tube said:

thanks for the input.  I can make any configuration you want.  I am making one now for a guy in the UK that has heated grips, wants the control box to mount to it, and attach to the fork pinch blots.   

 

I just got a new bike. Can I get one fabricated that will attach to the pinch bolts? 3 rockers. How much?

Link to comment
Share on other sites

That's fine share the files. I'm not out for profit just like to design. I just ordered hardware to make 5 more. One will be a prototype for a VFR.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

Terms of Use