BlueBlackBird Posted August 16, 2009 Share Posted August 16, 2009 Does anyone know off the top of their head the diameter of the axels front and rear?, Im in the process of making a tire balancer. Quote Link to comment Share on other sites More sharing options...
rockmeupto125 Posted August 16, 2009 Share Posted August 16, 2009 I can measure the axles if you really need, but both the 6004 and 6304 bearings have a 20mm bore...that's what your rod needs to fit. Typically a thinner rod with cone-shaped stops is used to acccomodate more than one particular wheel. Quote Link to comment Share on other sites More sharing options...
BlueBlackBird Posted August 17, 2009 Author Share Posted August 17, 2009 I can measure the axles if you really need, but both the 6004 and 6304 bearings have a 20mm bore...that's what your rod needs to fit. Typically a thinner rod with cone-shaped stops is used to acccomodate more than one particular wheel. Thanks Joe,thats what I need, I was going to have the wheel rotate on a shaft using external bearings, not the ones on the wheel itself, . Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.