hillbillyxx Posted July 1, 2006 Share Posted July 1, 2006 I had to drive 100 miles today to trailer the stepsons F3 home. It was parked at his work and got struck from the rear hard enough to fly 3 feet before landing on the right side. It didn't slide much after hitting the ground from looking at the marks on it. All the plastic on the right side is broken or scratched with the right bar end missing and brake lever bent. Thats all bad enough but after taking a measuring tape to it the swingarm seems to be to close to the frame on the right side right at the swingarm bolt. Nothing else measures the same on each side as in rear sets and heel guards. It's going to a shop tomorrow for an estimate as his company has agreed that they are at fault due to brake failure on the equipment that hit him. Plus he was properly parked and it was on camera. What do I need to be looking for to make sure the frame is straight before they put it back together? Any advice? Quote Link to comment Share on other sites More sharing options...
Guest rockmeupto125 Posted July 1, 2006 Share Posted July 1, 2006 Computrack. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.