Jump to content
CBR1100XX.org Forum

Suf Daddy

Members
  • Posts

    436
  • Joined

  • Last visited

Reputation

0 Neutral

Profile Information

  • Location
    Boston
  • Interests
    Cars and tracks
  1. Like someone said, LED's have a low voltage drop, so most blinkers need a load capacitor or gizmo to make them bulbs "blink" or not set off the electronic car monitoring system that tells you your bulbs out, headlight out etc......... Otherwise those chimes or symbols will wear on you. -Suf Daddy
  2. $340/yr., or so but I had a car through them also. Bike only, over 35, no MSF -Suf Daddy
  3. http://www.quattro123.com/Chain.htm Seems I forgot to update a photo or two. When you line up the chain tool, you must be dead on in a straight line. I turned and turned until it got real hard, and turned somemore until it gave, (yielded) and then turned a little more while watching it to make sure it didn't crack or flatten more than the pictures.............. HTH -Suf Daddy
  4. Another list I read said send them a fax after hours. BLACK paper, long enough for you to tape the ends together to make a continuous loop. Call daily. ANother idea is to fax the customer service manager or phone line. Nothing answers hello like a fax tone.......... Use redial/polling option. just some things I read....................... -Suf Daddy
  5. White buffalo racing.com $5 AFAIK My spares are the wrong kind. VM they look like they'lll fit................. NO -Suf Daddy
  6. There may be some visual reference that MAY help, I dunno. Sliding the caliper along the track on the swingarm helped some. If you squeeze the brakes or foot pedal that will close the gap on you. -Suf Daddy http://www.quattro123.com/SprocketandChain...Replacement.htm
  7. Compressed air and a lit cigar? I like the chain /BB's idea to rattle the bottom of the tank clean. -Suf Daddy P.S. DON"T try the lit cigar and compressed air idea. BOOM !
  8. Looks like he changed the title. -Suf Daddy
  9. I linked to this guys' site about doing a Yammi rect. Someone else did it too. www.quattro123.com/ click on the BB. -Suf Daddy
  10. Send 'em to me and I'll post them for you. - SuffolkD@aol.com
  11. DID chains (I got mine at WhiteBuffaloRacing.com) seem to be labeled BOTH 50 and 530. Its the vm or Zvm that notates the tinsel strength. http://www.quattro123.com/Chain.htm VM for 1000cc's zvm for 1300cc's
  12. They drop ship from suppliers location (at least the sprockets I got) So be prepaired that your whole order may not show up at the same time. The specific ZVM 530 chain I wanted for 1100 cc's showed up as a 530VM chain rated for 1000 cc's with a sticker over the rated for 1000 cc's. Most people don't care about 100cc's I did. EXTENSIVE info here: http://www.quattro123.com/Chain.htm They did call to verify some info and were pleasureable to deal with on the phone. I may try again but, White Buffalo racing beat them on the replacement chain AND it INCLUDED the master link. HTH - Suf Daddy
  13. Holy smokes............ You got some photos of it? -Suf Daddy
  14. Sprocket and splines in photo, I get 13 too. -Suf Daddy
  15. Did it look this bad? '97 w/29K OR -Suf Daddy
×
×
  • Create New...

Important Information

Terms of Use