Jump to content
CBR1100XX.org Forum

John01XX

Members
  • Posts

    11,784
  • Joined

  • Days Won

    55

Everything posted by John01XX

  1. Peter asked: I finally got around to checking ! I sell the double green dot at $33.85 shipped in the US Priority Mail Honda Part number : 06140-MAT-315 I do this as a favor to members - My cost is $26.00 and 3.85 to ship so I make 4 bucks. Honda Directline does treat me right. I am shipping 5 over to Jaws tomorrow. He buys alot for all the Brits.
  2. None of the above.........Power Bronze Double Bubble
  3. I will double check today on one or two green dots. ? And get the Part Number off the OEM Package.
  4. I have the Green Dot model in stock for $33.85 shipped Priority
  5. I have to agree with you Keith I monitor this site at work often and have a problem with some of the Avatars as well. I don't think they can be turned off tho Teckno what say ye ???
  6. Just look at the Avatar and you will know he really is "THE Part MONSTER" that is in a good kinda way tho !!
  7. R & G Racing make great sliders for the Bird.
  8. John01XX

    x11 cct

    Sure Justin, send me your shipping address and I will get one right out to you. I sent one out this morning to another member already. You can send Payment by Paypal to john@bikebits.us or just drop me a check in the mail to John Smith 1407 SW 24th Court #3A Fort Lauderdale, FL. 33315 let me know and I will get it out immediately
  9. John01XX

    x11 cct

    Scott, The X11 is only sold in Europe. The X11 CCT is only available in Europe. There have been a couple group buys for the X11 CCT arranged by Joe (rockmeup) but may not be any left. Maybe one of the guys will be willing to give theres up if you offer something in trade like cash, ass or grass, did I say that ? If you are interested in a US spec green dot Lifter set (CCT), don't go to the stealer, instead order one from "ME" I am flying out of town tomorrow for the weekend but could get you one out on Monday for $33.85 shipped in the US.
  10. Come on, don't pull my leg !! That is obviously not correct !! I agree with BDAZ XX on the Earth's Gravitational, Hemispherical Polarity thing myself. Sounds much more logical to me :wink: Exhaust Header runs down that side .......jeeeess.....I bet then the next thing will be said is it has something to do with Heating or rather Cooling as well ??
  11. Give Orlando Rich a shout and he can tell you what shops are worth visiting in your area.
  12. Greg If you can locate one in Miami, let me know and I will pick it up for you and send it up to you in Orlando if you like I live just north of Miami or you could probably get it shipped directly to you in Orlando What ever.....If I can help let me know.
  13. If anyone runs across a used BIRD fan assy on ebay or whatever, let me know. Looking for a deal on a used one or even a broke one since I need it for sizing only. Must be cheap cause I am cheap !!!!
  14. John01XX

    Sea Foam

    Big chain here in So Florida called Discount Auto Parts (DAP) all carry it I just found out. Called the store to confirm that it is in stock. Thanks for all the help Next time I will make the simple phone call before bothering this board !
  15. John01XX

    Sea Foam

    Thanks, we have Autozone and Napa Auto here in Florida
  16. John01XX

    Sea Foam

    Where is the best place to locate "SeaFoam" to buy ?? My neighbor just bought a 97 Mustang for her 17 year old son and wants to run a good engine cleaner through it. It Sea Foam readily available at Pepboys or Advanced Auto Parts etc or maybe Walmart ?
  17. I think the one thing I want to try is the replacement of the fan blade inself with a 5 blade higher volumn blade in the existing Honda housing but haven't gotten ahold of a second fan to play with and adapt a new blade.
  18. Muzzy does not make a direct Bird replacement but my mechanic said he carries most all that Muzzy offers and can retrofit one in a stock Bird housing if I can get him a new housing/motor. I am watching ebay for a cheap fan out of a Bird used but woking.
  19. I have experimented with various options also and have decided to locate a second fan as well and replace the fan blade with a custom blade from Muzzy in the same stock housing. Much higher air volumn and only one fan would then be needed, and still hooked up to cut on and off per OEM spec's. I also run Engine Ice which is made and was developed here in South Florida for race track use. Now to just find a deal on a Bird Fan and get it done.
  20. I haven't put them on the site due to only selling about 4 a year here in the states. I ship over 10 a month to the UK tho. I will have to get the site updated They are $26.00 shipped priority mail, 2-3 days
  21. There are many good products out there. Most all that are labeled as a Polish will work exactly like you need them to. I tell customers all the time, when asked this question, "Depends on whether you drive a Ford or a Chevy!" another words - personal preference. Meguires, Mothers, Simoniz all good name brands. I prefer "Factory Finish" but then that is the name brand I created and developed here at "Sonny's The Car Wash Factory". 11 years here overseeing the Professional Detailing Department and publishing a 50 page detailing catalog for the Car Wash Industry annually.
  22. For any fine scratch's or swirl marks --NEVER-- use a compond of any kind. A straight polish with only chemical abrasives will do the job the best. Stay away from anything will physical abrasives in it. When using any abrasive product you will be removing a layer of the clear coat to make the scratch disappear. You want to leave all the clear that you can for long term durability. Basically when polishing out a scratch you are actually lowering the outter surface of the clear coat to equal the depth of the scratch. The Clear coat is what maintains your UV protection for the paint underneath. Don't thin out the clear coat any more than you absolutely have to. A straight polish will round the edges of the scratch just enough so that the scratch is not visable to the naked eye. There will still be a slight indentation in the clear coat but the area immediately around the scratch will keep it's original thickness. Always follow up any polishing with a wax or glaze to help level the polished area and add some protection directly where the scratch was.
  23. Joel , these are Only found here in the US. Actually made in Arizona I believe. That is why I sell so many overseas to Europe. I ship often to Hevet in the Netherlands and also about 10 -20 a month to Jaws in England. The Vista Cruise is the prefered Throttle Lock in Europe if people just know where to get them from. I sell alot of them but use a throttlemeister on my own bike !! :shock: How ironic is that. ?? I have the Throttlemeister on the right handlebar and a matching barender lock on the left handlebar. I wanted the matching look as well as the heavier weights to keep the SMOOOOOTH feeling to the hands. 8) Plus the barender is real handy for locking the helmet without removing the seat to use the OEM helmet lock. Gotta match -- looks/bling is everything !!
  24. I currently have 2000 miles on a rear Power and 6000 on the front Road I like this combo
×
×
  • Create New...

Important Information

Terms of Use