John01XX

I had a 10 X 10 slab the same (4-6"thick) with wire. Big backhoe, putting in new sewer lines, crushed about 2.5 feet on a corner so I decided to cut a line across with a concrete saw making it a 10 X 7 slab. I made the cut no problem but only had a 6lb sledge. Was a hell of a job breaking the stuff up. I had about 4 hours of swinging the sledge over 6 days to just break up the 3 X 10 end. It was a bitch. I would recommend a good jack hammer or Bobcat as said. If you can dig under an edge then it brakes off pretty easy but on solid ground it will laugh at you each swing of the sledge.

Believe it or not I am interested in a 5k for the high beam and I haven't even got the 6K low beam in yet. Alittle blue for bling on low and a bright blinding ass 5k for high beam sounds good to me

I Have had mine for 3 years now - love them. Perfect fit

I am taking this dragrace thing very seriously myself !! I mean who isn't ?? Course every time I hit the starter buttton on the Bird I take it very serious. I just had the Bike tuned up, fluids changed, custom map adjusted for max performance with 6 dyno runs to get it perfect. Running a Pilot Power and am willing to put up large sums of cash for the Drag Strip. I will bring my own straps also !! I think Dion and Charlie are the only ones that have even considered challenging me so far !! Course we have decided that the race winner will have the highest number of seconds in an 1/8 mile race, no extra run off will be needed. Hey balance is everything on a Bike, Right ?????? Most laydown's involve speeds of less than 5 miles per hour !! :wink: :wink: :wink: :wink: :wink: :wink:

Regular Price is 147.00 per single set-up. That is what I paid today. That is a pretty good price so I bet the group discount will not be a very big one for 4-6 more. But who knows !

No Stress here !! Come to think of it all these damn Hurricanes originate over South Africa right ?? So I guess that means it is not George B. fault after all !! Brian, what do you have going on over there ??

Hell Yea !! I will take a single 6000K H7 kit I guess you all ready know that huh ??

I don't think so but then I have never done it before either. Hopefully someone who has done the conversion will respond !!

cool pm sent

What ever you prefer I will make it happen. I can Paypal the money to you immediately or mail you a check or whatever ?? Let me know - I don't care

Rich, Looks great to me. Lets do it H7 bulbs

Any great deals Rich ?? I am Ready

Rich I am in and would like the McColaugh(SP) system with the longer leads. I would prefer the 5000 or 6000k for brightest light. I have the funds in paypal for immediate transfer to you when you find the best deal. Thanks John

I will diffenently do halves on the 6000K Rich. I think nomuseo wants in also, maybe with G4 we can get a deal on two sets.

Rich, If you are not interested in the 6000 kit I will jump in and work a deal out with Brian John

I am not sure how to compare the difference but many have done the change on this board and the difference is significant. I have looked at others with HID and they are wicked bright !! There were some comparison pic's posted a while back but not sure if they are still accessible. Hopefully others will speak up now that have done the HID thing !!

The 5000k is the truest white light with 3200 lumins The 6000k is white with a slight purple tint and 2800 lumins The 8000k is blue tinted with 2500 lumins The 10000k is deep blue with purple tint and 2200 lumins etc etc I want to go Beemer hunting after dark and blind those blue tinted posers !!

Rich, I am being the hard ass here !! I want the bright light for best visability and am not concerned with the tint of the light. The blue tint looks cool on the Beemers but I don't like Beemers anyway. !! If I am going to spend 150.00 on lighting I want the brightest I can get. In fact I want to be able to blind the freckin Beemers !!!!!! Maybe I should just get both high and low 5000k kit and go bmer hunting after dark

Rich, I just opened the link you post and read the discription and clicked on his other items up for auction and he is selling all the different kits with descriptions of each.

I would be interested in going in half, cept I want the 5 or 6000K unit instead of the 10000k unit. 5 /6000k is brighter and cost less from same company

Power Commanders are made here in the States You would need a PC III for the 2002

Can you say RAPE !!!! Order a few from Honda Directline or Ron Ayers or Service Honda !! You should be able to buy them for 1/2 that price.

Buy the Honda filter three or four at a time (their cheap) and change them every oil change. Other than tires that is the only service your Bird will require of you for years of a loving relationship.

I have 35,000 on mine and it is going in the shop next week in preperartion for NEXXT. Total fluid change out and valve check and tuneup and Dyno run to compare with the same I had donne when new. Fine tune the map and then off on the Train to PA. This will be the first check up since I bought it new in 2001 other than the initail set-up at 750 miles when I put on the Full Akro system, K&N, PC2 and custom map.