Leaderboard
Popular Content
Showing content with the highest reputation since 02/29/2024 in all areas
-
I got this bike on trade recently and thought it might be of interest to someone here for a wives bike or entry rider. 2004 CB600F (naked bike). Yellow in color - 8k original miles. All stock (well - after market front signals and a hand chopped mud flap out back) and damn near flawless with recent/new-ish rubber. Clean title etc. Asking $2999 at the shop but if someone from here wanted it I'd make a deal in the $2k ish range. Idk why - its just strikes me as too nice for a local squid to stunt it Edit: Pics to follow and located at my store in Idaho Falls ID6 points
-
Sold it to a 70 year old guy in Utah with 25 bikes in a 10 car garage lol6 points
-
Thanks for posting here. It's great you stop by with good deals.4 points
-
Hey, did you notice that Phillip isn't on here talking about how his Blackbird is broke down? 😁3 points
-
That totally makes sense. The machine has a plastic spacer thing, but it rests on the bottom so it's probably not very helpful with such a heavy item. I'll try suspending tomorrow and see if it works better. Thanks, I'm surprised I'm still going at it. Today I briefly thought- the smart way would have been to commit and completely disassemble it, but I'm 99.999347% sure it would have become a pile of parts for eternity. Much of the motivation is being able to ride it and show it between stints of working on it.3 points
-
3 points
-
Well, I was fortunate today. I bought my DR field mower from Bluff City Cycles. Looking for motorcycle shops in my area, this came up. Got my parts in, so I brought the bearings and the drive assembly in to see what he thought. He didn't have that many more tools than I had, but he was much more familiar with driving these out and installing new ones. Total cost...just under $33. I can start putting it back together this weekend.2 points
-
Hey, I owned one of those until I let the neighbor who had just chugged half of a fifth of whiskey take it for a ride. Did not end well but he survived.2 points
-
I have some split-loom stuff on it now that's supposed to work, I just had it in the garage so on it went when I repaired the wires. We'll see. I have an old showerhead sprayer hose, much like flexible conduit, that looks ripe for the job if that doesn't work. He ate a whole cube of poison last night, so I'm guessing his aspiring replacement is considering measuring for new curtains. Usually a big bull rat like that keeps others scared away for a while and it takes some time for a successor to get curious enough to risk looking around too closely. I'll have to keep a welcome platter prepared for the next candidate. Good call. 1982 CB650SC. It's a friend's "someday" project that I'll probably end up doing for him at some point when I run out of projects of my own. (giggle)2 points
-
2 points
-
2 points
-
Sure you do. Use something long and thinner at one end to prise under the to door and raise it up a wee bit. Put a block under the door, reset your prising bar, and repeat until there is room for your hydraulic floor jack. Now you're in business. Raise the door with the jack, block it up, and lift the door again using whatever you can find...4x4 post, two 2x4's secured together, etc. keep lifting until the door is at least halfway up. As more of the door passes the 90 degree corner, less weight will be direct lift and you should be able to push the door up by hand. You did it! Just you and your friends leverage and hydraulics!2 points
-
My wife loved it... and I randomly fill out pages and don't tell her so she is surprised each time I do... $30 below... on the Tik Toc shop it was $9 shipped. https://seasonalpicks.gifts/products/what-i-love-about-you-leather-journal2 points
-
2 points
-
Like Super said, if you can get the part, take it to any machine shop or even a decent auto repair shop to press the bearings.2 points
-
2 points
-
https://www.facebook.com/share/1XTdUzgrFfyHvNjn/?mibextid=79PoIi checked it out over the weekend. Pretty clean. A couple small marks helibars, longer cables, heater grips, 2bros pipes, zero gravity screen, power commander, vortex sprocket, chain and tires new manual and tool kit still in place2 points
-
2 points
-
2 points
-
2 points
-
2 points
-
I took the first freeway ride yesterday, it was short and traffic kept me from getting much above 70, but it rode fine. It wanders mildly on rain groves, but not bad.2 points
-
My main battery charger was purchased in the 80s and I've never thought it needed replacing.2 points
-
There's still plenty more to do, but she's crossed the hurdle between crusty and patina. Being the nut that I am I wanted to try to make no-sling chain lube. I diluted some moly fortified grease with mineral spirits and soaked the chain. I probably rode it a bit too soon and it did sling, but I'll see how it goes after the spirits fully evaporate. The crusty old chain cleaned up pretty well. Lots of hot bubble bathing in a sonic cleaner, another buzz bath in EvapoRust instead of degreaser, then a final degrease and thorough rinsing. After the final rinse I hit it with compressed air then stuck it in the toaster oven at 350 to make sure it was dry all the way through. I let it cool to handling temp then stuck it in the lube bag for a soaking.2 points
-
2 points
-
2 points
-
2 points
-
Home made tire balancer. It's a little fiddly, but it works fairly well, it's super compact, and was 'free'. It took time and stuff that I had lying around, but no money was spent on it. 4 small ball bearings, 10-32 screws and nuts, and some angle iron. It's fairly easy to detect 1/4oz., below that it gets dodgy. Being that 1/4 is as precise as balancing usually gets, and I don't plan to do any 200MPH rides on this sub-100 MPH bike, I decided that it's good enough. Interestingly, the rear had no weights and is only 1/4oz off with the new tire. The front had a 3/4 oz weight about 2" away from where it now needs between 1/2 and 3/4. I had marked the heavy spot of both wheels without the tires, but the shop cleaned off my marks.2 points
-
2 points
-
I get that with some vehicles that may not be 'special', but are too nice to not want them to go to a buddy.2 points
-
2 points
-
I have a pair, but they clash with my KTM jersey. I find them useful for shoveling snow, but they're best worn with the chaps. Maybe your supplier has a matching jersey? Ask to see their Judas Priest collection.2 points
-
I think it was about 7 degrees that day. No heat/insulation in garage. New tires and old were inside over the baseboard heat. Decided to cart the stuff inside to do it. NEVER could have done it with cold tires.2 points
-
2 points
-
Doesn't Joe have a new fancy garage to do all things motorcycle related? No heat in there yet? Or maybe wanted the rubber warmer for ease of installation? Likes to cook while swapping rubber?2 points
-
2 points
-
Factory farmed birds may be one of the shittiest things we can eat. And we might create the next pandemic this way.1 point
-
We've had a couple California King snakes around, but the dogs harass them and off they go. I'd love to have some in the yard, they're beautiful and not only do they help with the vermin, but rattlesnakes are among their prey as well. I haven't seen a rattlesnake here yet, I know they're around but my guess is the dogs keep them away as well.1 point
-
1 point
-
A nice occasional treat that's not shitty is a real bagel made in NYC, outlying areas of NYC or possibly north-eastern areas of NJ. Everything else is a shitty bagel or in this case a "bagel shaped bread product". I'm all for people seeking "healthy" ingredients but stop appropriating the original delicious product and pretending it's made better.1 point
-
1 point
-
1 point
-
1 point
-
1 point
-
1 point
-
Zuma was: Ped - $3700 Set Up - $295 Doc Fee - $195 No tax - Discount - $500 Trade - $2650 Apple Card - $1040 Done1 point
-
Gorgeous. I used to keep my 954 in the dining room. Not enough XX floor space. Bill, I don't know what you call it in frozen tundrastan, but it's the room we keep and prepare food in, as well as store and manage cleaning for utensils and eating surfaces . We call it the kitchen. The dishwasher is in the dining room, and that has seen it's share of off-label use as well.1 point
-
Next time someone presents me with a stupid correlation as proof of something I'm gonna hit them with one of these.1 point
-
Tough call. It would be silly to have one aging away for no good reason, but if they suddenly go out of production then it would be prudent to have one.1 point
-
1 point